• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Autowatch Ghost Immobiliser

The autowatch ghost immobiliser is an innovative security device that's easy to install. It guards against key cloning, car hacking, ECU swapping and more.

The Ghost Immobiliser communicates with your CAN bus network and locks the engine with a a personalised PIN code. There is no LED indicator or sound and it's completely inaccessible.

Easy to install

Autowatch Ghost immobiliser is the most sophisticated vehicle security system available on the market. It connects directly to the engine control unit through an CAN data bus, which blocks key cloning or theft. It also stops thieves from changing the ECU to bypass the system and make an entirely new key to start your car.

The Autowatch ghost immobiliser problems can be fitted in almost any vehicle and does not emit radio frequency or LEDs to signal its presence. It works with the CAN Data network and responds to inputs from buttons that are already present on the steering wheel and dashboard, as well as door panels.

After you have your Ghost Immobiliser set up, it will be programmed with a unique PIN code. The pin is created specifically for your vehicle and will only permit you to start your vehicle when you enter it correctly.

It's very simple to change your PIN code whenever you need to. Just make a note of the previous PIN and scratch it off your Emergency PIN Card, then follow the steps to reset it.

If you forget your PIN, there is an emergency code that can be set up by your technician for a quick reset. This will be explained to you at the time of installation, and will ensure that your vehicle is protected even if you do forget your PIN.

ghost 2 immobiliser cost 2 is the newest TASSA approved product. It has been tested and proven to prevent key cloning or theft. It has met all security requirements and is now automatically accepted by insurance companies as an approved security measure.

It is very difficult to copy keys and thieves won't be able to swap the ECU of your vehicle to start it, without first entering your PIN code. This will guard your vehicle against spoofing or jamming devices that attempt to obtain codes from the original remote fob.

The Ghost Immobiliser is very easy to set up. It only takes few minutes to complete the installation. Your technician will guide you through the installation process and demonstrate how it works. He will also give you a Ghost 2 emergency card and owner manuals.

It is simple to modify your PIN code

The Autowatch Ghost immobiliser ghost, one of the most advanced security devices designed to safeguard your car against key hacking or cloning. It uses the CAN Data Network to secure your vehicle without requiring additional key fobs or cutting wires.

It is simple to change your PIN number at any time after it's been put in within your vehicle. This can be done by using the buttons on your steering wheel or dashboard and you can create up to 20 numbers of PIN codes.

When you change your PIN code, the device will flash a couple of times to signal that the process has been successful. This process can be repeated as many times as you wish until you reach the right combination. There are a few things you should know prior to starting this process such as which buttons are available in your vehicle.

You can also use the service mode feature to allow you to start your car and drive it with no need to enter the PIN code. The garage will then be able to service your vehicle and not need to know the PIN code , which could be an excellent feature in case you're not certain of the pin you'd like to use at the time of the service.

Sussex Installations sells this product and is a TASSA Approved Installer. This means they are registered with TASSA. Third parties can have confidence in the installation process by having it executed correctly and in compliance to the specifications of the manufacturer.

It's easy to set up the Ghost, a revolutionary next generation device that doesn't need cutting wires or installing aftermarket key fobs. It connects directly to your vehicle's CAN data network. A unique PIN code can be entered using buttons on your vehicle's steering wheel and dashboard to stop thieves from taking your vehicle.

The Ghost is protected by the unique CAN data network connection. This means that modern thieves are unable to detect it using diagnostics to detect circuit cuts. It does not emit a radio frequency signals, which could make it easy for them to find it. This means that your vehicle is safe and secure all the time from any possible theft.

It can be fitted in any vehicle

In contrast to the traditional key-cloning devices that rely on relay boxes to fool the vehicle into thinking that keys are present The Ghost Immobiliser does not allow your car to start unless the PIN code is entered correctly. This protects your vehicle from hacking, key-cloning and key theft. It also stops thieves from using stolen or fake keys to unlock your car.

Using the vehicles buttons such as those on your steering wheel or dashboard, a personalised PIN code is generated to secure your vehicle. This can be altered at any time to create a unique PIN code that is mathematically impossible to guess.

Modern car thefts can happen in a matter of seconds, so it is essential to have a system that can stop your vehicle from being taken. The Autowatch Ghost Imobiliser is a new generation vehicle security device that prevents vehicle theft by limiting access to the engine, until your PIN has been entered.

It can be found in a variety of vehicles that include motorhomes and vans, as well as motorcycles, lawnmowers that are ride-on and plant machinery. It is also weatherproof and tiny, making it virtually impossible to detect by thieves.

The Ghost Immobiliser communicates directly with the ECU via the data bus, which allows it to immobilize your vehicle. This means that it is not able to be bypassed, altered or bypassed in any way. It has been modified for every vehicle listed as compatible and thoroughly tested prior to release to the market.

The Autowatch Ghost Immobiliser is, therefore, extremely difficult to detect. It is possible to install it anytime you move or change vehicles, as long as it's compatible with the new vehicle.

Another advantage of Ghost Immobiliser is that it can be used in valet mode. it means you can give your vehicle over to an valet service provider or dealer without giving them the keys. It also blocks any incompatibility between the dealer's equipment and their diagnostic equipment because it prevents communication as part of its security features.

The Ghost II is also TASSA approved, making it a very useful security feature that could lower your premiums. It is recognized by insurance companies as of the 1st March of 2020, and has unique fingerprints placed on high-value components of the vehicle. This allows officers in investigations to identify the owner quickly.

TASSA Approved

The autowatch ghost immobiliser has been approved by TASSA and offers the highest theft protection. It is expertly designed to tackle the most prevalent types of car theft that involve keys. It does not require keys, remotes, or LED indications which can reveal its location, and it is completely inaccessible.

The device is compatible with many types of vehicles and works with the CAN bus network data network. It is also simple to install and has a low risk of installation. It is weatherproof and doesn't use radio signals, so it is very difficult to detect.

It uses the original buttons on your vehicle to enter a pin code. It is possible to change this at any time. This makes it simple to modify and only you'll know the new code.

You can even create an emergency PIN that is unique to your ECU. This will stop thieves from trying to duplicate your key or to replace it. It can be changed at anytime. It can be made 20 times more long to make it more difficult for thieves to find it.

Autowatch ghost immobiliser won't let the engine to start unless you have entered the correct pin code. This is the only way to unlock your car and prevent thieves from taking it without your consent.

The device also has an option for service mode that allows the vehicle to start and drive for tracker a short period without the requirement of a PIN code. This means you can get your vehicle out of the garage and back onto the road with no compromise on security.

It is an CAN bus-compatible system that communicates with your vehicles ECU to shut off the ignition when an unauthorised key is used. This makes it inaccessible to the majority of people and doesn't have the chance of being detected by your vehicle's diagnostic tool, making it a very effective security measure.

The interface of the autowatch ghost immobiliser is very user-friendly and is compatible with all modern vehicles. It can be transferred to a new vehicle and doesn't require any additional wiring. It can respond to inputs from the CAN bus. It can determine if your vehicle was stolen using high-quality sensors.